Piranha4 8k Color Camera
User’s Manual
45
Teledyne DALSA
03-032-20274-00
Microcode Version DeviceFirmwareVersion Displays the currently loaded firmware
version number. Firmware files have a
unique number and have the .cbf file
extension. (RO)
1.00
Beginner
Device Version
DeviceVersion
Displays the device manufacturing
version. (RO)
1.00
Beginner
FPGA Version
DeviceManufacturerInfo This feature provides extended
manufacturer information about the
device. (RO)
1.00
Beginner
Hardware status
StatusErrorHardware
Camera Status; bit set when :
Bit0: no trigger during more than 1s
Bit1: trigger too fast
Bit8: overflow occurs during FFC
calibration
Bit9: underflow occurs during FFC
calibration
Bit11: CC3 scrolling direction(0:Fwd,
1:Rev)
Bit16: hardware error detected
1.00
Beginner
Temperature
DeviceTemperature
Displays the internal operating
temperature of the camera. (RO)
1.00
Beginner
Power-on User Set
UserSetDefaultSelector
Selects the camera configuration set to
load and make active on camera power-
up or reset. The camera configuration
sets are stored in camera non-volatile
memory. (RW)
1.00
Beginner
Factory Setting
Default
Load factory default feature settings
UserSet1
UserSet1
Select the user defined configuration
UserSet 1 as the Power-up Configuration.
UserSet2
UserSet2
Select the user defined configuration
UserSet 2 as the Power-up Configuration
UserSet3
UserSet3
Select the user defined configuration
UserSet 3 as the Power-up Configuration
UserSet4
UserSet4
Select the user defined configuration
UserSet 4 as the Power-up Configuration.
User Set Selector
UserSetSelector
Selects the camera configuration set to
load feature settings from or save
current feature settings to. The Factory
set contains default camera feature
settings. (RW)
1.00
Beginner
Factory Setting
Default
Select the default camera feature
settings saved by the factory
UserSet1
UserSet1
Select the User-defined Configuration
space UserSet1 to save to or load from
features settings previously saved by the
user.
UserSet2
UserSet2
Select the User-defined Configuration
space UserSet2 to save to or load from
features settings previously saved by the
user.
