Dalsa PC2-Comp Express OC-P2EM-COMP0, User Manual

Page: 18 / 74

12
•
Installing the PC2-Comp Express PC2-Comp Express
Device Driver Upgrade Only
Minor device driver upgrades may be distributed as ZIP files available on the DALSA web site
(
http://www.imaging.com/downloads ). Device driver upgrades are also available on the next Sapera
LT CD-ROM release.
Minor device driver upgrades often do not require a successive Sapera LT upgrade. To confirm that
the current Sapera LT version you are using will work correctly with a new device driver:
•
Open and review the new device driver's ReadMe file before installing to verify the minimum
Sapera LT version required.
•
If the ReadMe file does not specify a Sapera LT version, contact DALSA Technical Support (see
" Technical Support " on page 62 ).
To upgrade the device driver only:
•
Log on to the computer as an administrator or with an account that has administrator privileges.
•
From the Windows start menu select Start • Control Panel • Add or Remove Programs .
•
Select the DALSA PC2-Comp Device Driver, click Remove , and then in the InstallShield dialog
click on Remove to uninstall the board driver.
•
When the driver uninstall is complete, reboot the computer.
•
Log on to the computer as an administrator once again.
•
Install the new device driver:
•
Run Setup.exe if installing manually from a driver file you download from the DALSA web
site).
•
If the new driver is on a Sapera CD-ROM, follow the installation procedure described in the
section “Installaing PC2-Comp Express Hardware and Driver”.
Important: Sapera LT must be installed on your computer in order to install a DALSA device driver.
Sapera LT and Device Driver Upgrades
Follow the procedure described below when both Sapera LT and the DALSA device driver are
upgraded.
•
Log on to the computer as an administrator or with an account that has administrator privileges.
•
From the Windows start menu select Start • Control Panel • Add or Remove Programs .
•
Select the DALSA PC2-Comp Device Driver, click Remove , and then in the InstallShield dialog
click on Remove to uninstall the board driver.
•
From the Windows start menu select Start • Control Panel • Add or Remove Programs .
•
Select the Sapera LT, click Remove , and then in the InstallShield dialog click on Remove to
uninstall the board driver.
•
Reboot the computer and log on to the computer as an administrator once again.
•
Install the new versions of both Sapera LT and the device driver as if it is a first-time installation.