10
•
Installing the PC2-Comp Express
PC2-Comp Express
Firmware Update: Automatic Mode
Click
Automatic
to update the PC2-Comp Express firmware.
If there are multiple PC2-Comp Express boards in the system, all will be updated with new firmware.
If any installed PC2-Comp Express board installed in a system already has the correct firmware
version, an update is not required. In the following screen shot, a single PC2-Comp Express Full board
is installed in the system and the default configuration is ready to be programmed.
Firmware Update: Manual Mode
Select
Manual
mode to load firmware other then the default version or when, in the case of multiple
PC2-Comp Express boards in the same system, each requires different firmware.
The figure below shows the Device Manager manual firmware screen. Information on all installed
PC2-Comp Express boards, their serial numbers, and their firmware components are shown.
A manual firmware update is made as follows:
•
Select the PC2-Comp Express to update via the board selection box (if there are multiple
boards in the system)
•
From the Configuration field drop menu select the firmware version required
•
Click on the Start Update button
•
Observe the firmware update progress in the message output window
•
Close the Device Manager program when the device reset complete message is shown.
Summary of Contents for PC2-Comp Express OC-P2EM-COMP0
