48
Appendix A: GenICam Commands
Camera Power-Up Configuration Selection Dialog
CamExpert provides a dialog box which combines the GemICam features used to select the
camera’s power-up state and for the user to save or load a camera state as a specific user set that
is retained in the camera’s non-volatile memory.
Camera Power-up Configuration
The first drop list selects the camera configuration set to load on power-up (see feature
UserSetDefaultSelector
). The user chooses the factory data set or from one of 16 available user-
saved states.
User Set Configuration Management
The second drop list allows the user to change the camera configuration any time after a power-up
(see feature
UserSetSelector
). To reset the camera to the factory configuration, select
Factory Set
and click Load. To save a current camera configuration, select User Set 1 to 16 and click Save.
Select a saved user set and click Load to restore a saved configuration.
Camera Control Category
The camera control category, as shown by CamExpert, groups control parameters such as line rate,
exposure time, scan direction, and gain.
Summary of Contents for Linea HS HL-FM-08K30H-00-R
Page 5: ...The Linea HS Monochrome Cameras 5 DECLARATION OF CONFORMITY 73 DOCUMENT REVISION HISTORY 74 ...
Page 15: ...The Linea HS Monochrome Cameras 15 Figure 4 HL HM 16K30H 00 R Mechanical Drawing ...
Page 26: ...26 Camera Performance and Features Figure 7 Image with incorrect scan direction ...
Page 73: ...Declaration of Conformity 73 Declaration of Conformity ...
