Dalsa Linea HS HL-FM-08K30H-00-R, Manual

Page: 50 / 74

50

Appendix A: GenICam Commands
Display Name Feature Description Device
Version
& View
128
64 128
64 TDI Mode: select the number of stages on
main array.
2:1
4:1
8:1 2:1
4:1
8:1 HDR Mode: select the responsivity ratio
between the two rows output. Number of
stages is: 128/64, 64/16, 128/16
respectively.
1:1 1:1 HFW Mode (High Full Well)
Acquisition Line Rate AcquisitionLineRate Specifies the camera
’s internal line rate, in
Hz when Trigger mode set to internal and
not in area mode.
Note that any user entered value is
automatically adjusted to a valid camera
value based on a 90 MHz clock. For one row
out the maximum is 300,000 Hz, for two
rows it is one half, 150,000 Hz
1.00
Beginner
Measured Line Rate measuredLineRate Specifies the line rate provided to the
camera by either internal or external source
(RO) 1.00
Beginner
Refresh Measured
Line Rate refreshMeasureLineRate Press to update measuredLineRate 1.00
Beginner
Acquisition Frame
Rate AcquisitionFrameRate Specifies the camera internal frame rate, in
Hz when in area mode and Trigger mode set
to internal. Maximum frame rate is 2,000 Hz. 1.00
Beginner
Direction Source
Internal
Line 2
Rotary Encoder
sensorScanDirectionSource
Internal
GPIO2
Encoder
How the direction is set:
Direction set by value of
SensorScanDirection
Direction set by pin 6. Low is forward, high is
reverse
Direction set by encoder
– Trigger Source
must be Rotary Encoder as well
1.00
Beginner
Internal Scan Direction sensorScanDirection
Forward
Reverse When ScanDirectionSource is set to Internal,
determines the direction of the scan
1.00
Beginner
Gain
Gain Sets the gain selected with the GainSelector
feature
1.00
Beginner