Dalsa C1240 User Manual Download Page 80

Page: 80 / 327

•

On-Semi Sensor Models

Nano Series GigE Vision Camera

Gain Control

In-sensor Analog Gain (1.0x to 8x) in 11 gain step

(1.0, 1.14, 1.33, 1.6, 2.0, 2.29, 2.67, 3.2, 4.0, 5.33, 8.0)

In-sensor Digital Gain (1x to 32x) in 0.01x step

In-FPGA Digital Gain (1x to 4x) in 0.007x step

Binning Support

Yes In-FPGA

(summing and average,

2x2, 4x4 )

Yes In- Sensor

(averaging 2x2)

Color Correction Support

Yes

Decimation Support

Defective Pixel Replacement

Yes, up to 512 positions

Image Correction

Yes, Sensor FPN correction feature

Image Flip Support

Yes In-Sensor – Vertical Only

Multi-ROI Support

Yes in Sensor, up to 16 ROI (mutually exclusive with binning)

On-Board Image Memory

90MB

Output Dynamic Range (dB)

61.8 dB (in 10-Bit Pixel Format)

SNR (dB)

39.7 dB (in 10-Bit Pixel Format)

TurboDrive internal limitation of 250MB/sec

† Note: The actual internal minimum exposure may be different than what is programmed. Use the feature

“

exposureTimeActual” from the

Sensor Control

category to read back the actual sensor exposure. The exposure start sensor event is delayed 4 µs from the actual start.

Firmware Files for Models 1240

The latest firmware files for all Nano models are available on the Teledyne DALSA support web site:

http://www.teledynedalsa.com/imaging/support/downloads/firmware/

The firmware files for this model are listed below. The xx denotes the build number.
M1240

•

Standard

Genie_Nano_OnSemi_Python_P3_1.3M_Mono_STD_Firmware_12CA18.xx.cbf

C1240

•

Standard

Genie_Nano_OnSemi_Python_P3_1.3M_Bayer_STD_Firmware_13CA18.xx.cbf

Summary of Contents for C1240








































































































































































































































































































































Search results

Summary of Contents for C1240

Reviews:

Related manuals for C1240

Brands by name

Popular brands

Dalsa C1240, User Manual

Search results

Summary of Contents for C1240

Reviews:

Related manuals for C1240

Brands by name

Popular brands