Dalsa C1240 User Manual Download Page 55

Page: 55 / 327

Nano Series GigE Vision Camera

Sony Sensor Models

•

Image Flip Support

Yes, In-Sensor, Vertical and Horizontal

Multi-ROI Support

Yes, In-Sensor, up to 16 ROI (mutually exclusive with in-sensor binning)

On-Board Image Memory

90MB

Output Dynamic Range (dB)

56.7

75.4 dB (in 8-Bit Pixel Format)

SNR (dB)

33.01

39.6 dB (in 8-Bit Pixel Format)

* Limited to the Genie Nano Architecture:

~250MB/sec Sustained into the TurboDrive Engine achieved using 1500 Byte Packet Size

Firmware Files for Model C2450

The latest firmware files for all Nano models are available on the Teledyne DALSA support web site:

http://www.teledynedalsa.com/imaging/support/downloads/firmware/

The firmware files for this model are listed below. The xx denotes the build number.
Bayer Output

“Genie_Nano_Sony_IMX25x_3.2M-5.1M-9M-12M _Bayer_STD_Firmware_8CA18.xx.cbf

High Sensitivity Bayer Output

“Genie_Nano_Sony_IMX25x_3.2M-5.1M-9M-12M _Bayer_HSD_Firmware_8CA18.xx.cbf”

RGB Output

“Genie_Nano_Sony_IMX25x_3.2M-5.1M-9M-12M _RGB_Output_Firmware_8CA18.xx.cbf”

Standard 12-Bit Design

“Genie_Nano_Sony_IMX25x_IMX392_2.4M-3.2M-5.1M-9M-12M_Bayer_STD_12b_Firmware_8CA18.xx.cbf”

Summary of Contents for C1240








































































































































































































































































































































Search results

Summary of Contents for C1240

Reviews:

Related manuals for C1240

Brands by name

Popular brands

Dalsa C1240, User Manual

Search results

Summary of Contents for C1240

Reviews:

Related manuals for C1240

Brands by name

Popular brands