dallmeier DDF4010HDV, Installation And Configuration Manual

Page: 23 / 107

DDF4010HDV
www.dallmeier.com 23
Locked ceiling clamp Locked ceiling clamp
Suspended ceiling
Fig. 6-4
Step 4

If PoE (Power over Ethernet) is not available, first connect the camera to a suitable
power supply unit and then connect the power supply unit to the mains socket.

If necessary, connect a CVBS monitor to the video preview output ( Fig. 5-3 ).

Align the camera with your scene using the 3-axis mount and set the focal length with
the TELE / WIDE buttons ( Fig. 5-4 ).
The “Little Man” symbol on the lens side indicates the sensor direction.

Disconnect the CVBS monitor from the video preview output.

Attach the trim ring to the housing and tighten the 3 housing screws using a T20 torx
wrench.
Suspended ceiling
Locked ceiling clamp Locked ceiling clamp
Trim ring with bubble
Housing screw
(T20 Torx)
Fig. 6-5