7
Dallmeier electronic GmbH & Co.KG
2
For your safety
The DAS-100/200 is built with state-of-the-art technology according
to the recognized technical rules with respect to safety.
However, danger to life and limb of the user or third parties could
arise through improper use. In addition, malfunctions or damage
to the unit or other objects may arise.
Only use the unit if it is technically in proper working order, to the
intended purpose and while keeping safety and potential dangers
in mind. Observe the technical specifications and the corresponding
instructions and/or documentation. Have malfunctions that could
compromise safety eliminated immediately! This applies especially
to damage to the power supply.
Appoint a professional
Installation, mounting, connection, start-up and configuration
of the DAS may only be performed by trained and authorized
professionals (installers).
In as far as not expressly specified otherwise, this specification
also applies to the maintenance, testing and repair of the unit.
Read and understand instructions
Read the documentation for the unit carefully and completely
before using the unit. Always follow the documentation.
Pay attention to the information
Pay attention to all the information attached to the unit as well
as to (any) information sheets supplied. Keep these in a legible
state.
Observe the rated voltage
The unit can be damaged or destroyed by the application of an
incorrect voltage.
The mains voltage must always match the rated voltage of the
unit. The rated voltage is specified on the rating plate of the unit.
Protection against condensation
If the unit is brought from a cold environment to a warm room
within a short period of time, condensation water can form inside
the unit. Short-circuits may then lead to functional impairments
or damage to the system.
Wait approx. 8 hours for the unit to reach room temperature
before starting it up.
