23
4
INFORMA
TION ON USE
AND OPERA
TION
Switching on the lights
Carry out the operations described.
1)
Turn the knob until the words ENABLING
LIGHTS appear.
2)
Press and turn the knob to toggle between
the following options.
- ON to switch the lights on.
- OFF to switch the lights off.
3)
Press the knob to confirm the selection.
- The words ENABLING LIGHTS will ap-
pear.
Setting the pre-infusion
Pre-infusion is a process that takes place be-
fore the coffee is extracted.
Pre-infusion is used to increase the contact
time between the water and the ground cof-
fee before extraction.
Pre-infusion is performed to enhance the
quality of the coffee according to the blend
used.
Carry out the operations described.
1)
Turn the knob to display the words SET
UP PRE-INFUSION.
2)
Press the knob to access the pre-infusion
time change option.
3)
The time to be changed will appear.
4)
Turn the knob to change the time.
5)
Press the knob to confirm the new tem
-
perature set.
6)
When set to zero (0), the pre-infusion time
is at the minimum.
7)
The time is shown in seconds.
8)
Press the knob to exit the pre-infusion set-
ting.
- The words SETTING UP PRE-INFUSION
will appear.
Summary of Contents for STUDIO AQUA
