15
4
INFORMA
TION ON USE
AND OPERA
TION
B) Knob:
this is used to scroll through the menu pages, as
well as to edit and confirm the machine operating pa
-
rameters.
C) Display unit:
this is used to display the operating and
programming parameters.
D) Signal light:
when the light is on permanently, it means
the machine is on.
- When the light is flashing, it means the machine is warm
-
ing up.
E) Signal light:
this shows when extraction is in manual
mode.
- Extraction is stopped manually using the same lever.
F) Signal light:
this shows that a double espresso is being
extracted.
G) Signal light:
this shows that a single espresso is being
extracted.
H) Button:
this is used to switch hot water dispensing on
and off.
L) Lever:
this is used to start extraction.
M) Lever:
this is used to start and stop steaming.
N) Steam wand:
it is used to froth milk and to make cap-
puccinos and milk foam.
P) Pressure gauge:
this shows the pressure in the water
circuit.
Q) Pressure gauge:
this shows the steam pressure in the
boiler.
Key to figure and description of controls
Description of the controls
The illustration below shows the machine controls.
A) Main switch:
this is used to power on the machine.
Summary of Contents for STUDIO AQUA
