Transcend
t
43™ Dual-Band DAS
DW-010-7373-09
Installation and Operation Manual -
Preliminary
Dali Wireless
Proprietary and Confidential
17
Rev: 0-2
Nov , 2011
0
2.2.2.1 t43™ External Interfaces
The
t43™
external (user) interfaces are located on the bottom of the unit and shown in Figure 2-6.
Table 2-2 provides description of the
t43™
external interfaces.
Table 2-2
t43™
External Interfaces
Ref.
Designation
Connector Type
Description
Interface Panel
1
ANT1
N-type female 50 ohm
Band 1 RF interface for transmit and
prime receive signals to/from
antenna.
2
ANT2
N-type female 50 ohm
Band 2 RF interface for transmit and
prime receive signals to/from
antenna.
3
ANT3
N-type female 50 ohm
Band 1 RF interface for diversity
receive signals to/from antenna on
units which are configured with
support for diversity operation.
4
ANT4
N-type female 50 ohm
Band 2 RF interface for diversity
receive signals to/from antenna, on
units which are configured with
support for diversity operation.
5
FIBER1
Sealed LC/UPC duplex
optical connector
Single mode optical fiber interface
supporting up to 6 Gbps data
transfer (depending on DAS
version)
6
FIBER2
Sealed LC/UPC duplex
optical connector
Second single mode optical fiber
interface that supports daisy-chain
of
t43™
s
7
ETHERNET
Sealed RJ45 female
connector
Communication interface for local
access to DAS network
8
BATTERY
Sealed 2 pin connector
DC backup power input interface
9
C&M
Sealed multi-pin (19)
connector
RS-232 interface
Manufacturing use only
10
GND
Ground stud
Interface for grounding unit
11
110V/220V AC
Sealed 3 pin connector
AC power input interface
Front Side
12
PWR
Two color LED
Green: Power ON
LED OFF: No Power
13
ALARM
Two color LED
Green blinking: Status OK
Red blinking: Minor Alarm
Red solid: Major Alarm
Orange: Fiber link problem
CommScope v. Dali Wireless
IPR2020-01409
DALI WIRELESS Exhibit 2004
Page 17 of 61
