Dal Zotto INSERTO 700 2.0, User Manual

Page: 48 / 164

48 ENGLISH
MOUNTING THE FRAMES
As standard, the insert has a finishing frame that, as well as finishing, covers the side slot required between the structure and covering.
THE INSERT MUST OVERLAP THE MARBLE COVERING SURFACE BY AT LEAST 1 CM.
N.B. ANY WOODEN BEAMS LOCATED ABOVE THE INSERT MUST BE PROTECTED WITH NON-INFLAMMABLE
MATERIAL.
FRAME ASSEMBLY IS IMPORTANT AS IT ALLOWS CORRECT RECIRCULATION OF THE AIR AND CONSEQUENTLY
OPTIMAL PRODUCT OPERATION.
INSERTO 700 2.0 UPPER FRAME ASSEMBLY:
The upper frame is fitted via 2 screws as shown in figure 2.
SIDE FRAME ASSEMBLY FOR INSERTO 700 2.0 :
The side frames are fitted using 2 screws per side as shown in figure 2.
figure 1
figure 2