Dal Zotto INSERTO 700 2.0, User Manual

Page: 46 / 164

5 cm
46 ENGLISH
Make a hole at the base of the flue (figure 1) for air circulation and to ensure the required combustion air for proper insert combustion.
If it is not possible to make a hole at the centre of the base, make two openings to the sides of the base, equal to the 550cm² overall lower inlet
(2 x 275cm²) (See figure 2).
( figure 1) ( figure 2)
Air inlet
To protect from any over-heating, the inserto 700 2.0 is supplied with a probe that analyses the temperature inside the structure and intervenes
by reducing the functioning power.
THIS VENTILATION SYSTEM IS TOTALLY INDEPENDENT FROM THE AIR INTAKE FOR COMBUSTION!!
In order for the insert to work properly, observe the measurements contained in the "MINIMUM DIMENSIONS" when building the chimney that
must be made of non-flammable material.
As well as the dimensions of the stove given in the technical features, consider at least 50 mm of air at the back of the insert. (see figure 3)
Base
Base
(figure 3)
Air inlet
275cm² Air inlet
275cm²