Advanced Operation 21
e.
Navigate to the .VLC file location and
load the configuration for Channel 1
by selecting a file and clicking
Open
.
Refer to
Figure 42
.
f.
Click
OK
after the
VLink
Configuration
window opens. Refer
to
Figure 43
.
g.
Repeat Steps a–f for V-Link
Channels 2–4.
Note:
If no functional configuration
backup is available, the configuration
must be re-entered manually.
7.
Save the configuration on the VIP-4400 by entering
CF S
in the
V7 VLink Debugger Command
box
and create a backup configuration if not done previously. Refer to
Figure 44
.
Note:
The
CF S
command only needs to be entered once to save all four channel configurations.
Figure 43:
Configuration
Figure 44:
Saving Configuration
8.
Test the configuration of the site under a normal operation scenario. Contact an on-site operator for
help running this test.
Figure 42:
Loading Configuration