Configuration Using Venus 7000 Software
7
•
To adjust hue, move the
Hue
slider bar or press
Alt-U
to move the cursor to the
Hue
setting
and use the
left
and
right arrows
to adjust.
•
To adjust saturation, move the
Saturation
slider bar or press
Alt-T
to move the cursor to the
Saturation
setting and use the
left
and
right arrows
to adjust.
12.
Click
Save Color Settings
or press
Alt-E
to save the color settings. The
Save Color Settings
dialog
box opens. Type the name of the color settings (for example, “Color 1”) and click
OK
or press
Enter
.
The settings are saved under the entered name and can be recalled using the
Color Settings
drop-down list.
13.
Press
Alt-K
to move the cursor to the
Key Color Levels
box and use
Tab
or
Shift-Tab
to move
between the color level boxes to set a key color if using overlay. Use the
up
and
down arrow
keys to
set the key color level.
Note:
Daktronics does not recommend changing the key color after setting it. The VIP-4400 supports
256 intensity levels for each color (0-255). The default setting is Green 247 (Red 0, Green 247, Blue 0).
Create sequences with key color in mind and use only that color for sequences overlaid on the video.
14.
Navigate to the
Input
menu and select the next video input (Channels 2-4). Repeat steps 3-13 to
adjust position or color settings for each input. Save settings after making adjustments.
3.2 Changing the Data Source
After the
V7 V-Link Controller
dialog box opens, as shown in
Figure 7
, video immediately displays on the
default sign. Before an event, change the data source to the DMP-7000 controller. To change the data source,
follow the steps below:
1.
Click the
drop-down arrow
next to
Data Source
and select
Venus
, or press
Alt-A
and use the
up
and
down arrows
to select
Venus
.
Note:
If the sign to control does not display in the
Sign
box, click in the
Sign
box and use the
up
and
down arrows
to select the correct sign.
2.
Click the
drop-down arrow
next to
V-Link Index
to select the desired VIP-4400, or press
Alt-X
and
use the
up
and
down arrows
to select the desired video processor.
3.
Click the
drop-down arrow
next to
VLink Channel
to select the desired output channel, or press
Alt-C
and use the
up
and
down arrows
to select the output channel. Each VIP-4400 outputs
four channels.
4.
Click the
drop-down arrow
next to
Input
to select the desired input, or press
Alt-I
and use the
up
and
down arrows
to select the input channel.
5.
Click inside the
Position Settings
text box and select the desired settings for this input or press
Alt-P
and use the
up
and
down arrows
to select the position settings.
6.
Click inside the
Color Settings
text box to select the desired color settings for this input setting or
press
Alt-C
and use the
up
and
down arrows
to select the settings.
7.
Click inside the
Data Source
text box and choose
Video
when ready to play video on the display, or
press
Alt-A
and use the
up
and
down arrows
to select
Video
.
Note:
If the monitor window is open, no video will play on the display because the video does not
send to the computer; the Venus
®
software data continues to play on the monitor.
