Configuration Using V-Tour® Software
13
Section 5:
Configuration Using V-Tour
®
Software
Initial configuration and property edits of the VIP-4400 are typically accomplished using Venus
®
7000
software, however the V-Tour
®
program provides another method for entering the same parameters.
5.1
Using V-Tour
®
Software
To configure the VIP-4400 using V-Tour
®
software, follow the steps below while referring to
Figure 14
and
Figure 15
.
1.
Enter the name of the VIP in the
Name
text box. When the configuration uses more than one
VIP-4400, use descriptive names to avoid confusion (e.g. VIP, Left VIP, Right VIP).
2.
Choose
Network
or
Serial
in the
Communications
box.
•
If
Network
is chosen, enter the corresponding IP address.
•
If
Serial
is chosen, select the
Port
from the drop-down list.
Note:
The port must be different from the port selected in the
Display
window.
Figure 14:
New Network VIP-4400
Figure 15:
New Serial VIP-4400
3.
Choose
VIP4500/VLink4500
from the
V-Link Type
drop down list. Refer to
Figure 16
.
Figure 16:
V-Link Type Selection
4.
Click
Next
. The
Summary
window opens.
5.2 Summary Window
The
Configuration Wizard
Summary
window provides an overview of information entered in the
Display
and
V-Link
windows. Refer to
Figure 17
on the next page.
Note:
If the options listed in the
Summary
window are incorrect, click
Previous
to adjust.
