Mechanical Installation
8
End Pad Attachment
End pads protect the ends of the table displays and also provide a finished look. To keep
the players safe, these pads
must be attached
any time the table is in use during games
and events.
The left- and right-side end pads are identical in shape and attach in the same manner
but mirror each other. The example shown in
is specific to left-side pads (as
viewed from the front), but right-side pads will attach the same way. Note that the table
face panel is removed for clarity.
To attach the end pads:
1�
Position the end pad at the end of the section. Four hook mounts attached to each
end pad align with cutouts in the table frame.
2�
Lift the pad up so all four hook mounts may be inserted into the cutouts. It is critical
that all four hook mounts are positioned properly so they hold the pad securely onto
the end of the table.
3�
Slide the pad downward in the angle of the frame after all four hook mounts are
properly positioned in the cutouts. This hooks the end pad onto the table.
4�
Verify all four brackets are hooked securely into the end of the table to prevent
damage to the end pad or possible injury to a player.
5�
Repeat
Steps 1–4
for the end pad at the opposite end of the table(s).
Hook mounts on
end pads align
with cutouts @4
in side perimeter
of frame
Figure 13:
Aligning Brackets with Cutouts
