Daktronics PROLINK ROUTER 605 Series, Installation And Maintenance Manual, Page: 39 / 54

Diagnostics & Troubleshooting
35
When the self-test is complete, disconnect power, remove all loopback connections,
reconnect cables, and restart power. Refer to Figure 35 and Self-Test Mode Messages for
further information on the error messages.
ERR
0 1 2
Figure 34: Test-in-Progress Pattern
Self-Test Mode Messages
While in self-test mode, the PLR615X status LEDs may display a message listed in Figure 35 .
If the ERR LED lights up, the PLR should be sent in for repair. Daktronics field personnel may
also reference the ProLink Router 615X (PLR615X) Self-Test Manual (DD2469872) for further
information.
The error code descriptions are listed in the table below.
Code Description
F 0 1 ProLink6 (coax) Port A error
F 0 2 ProLink6 (coax) Port B error
F 0 5 ProLink5 (SATA) Port A error
F 0 6 ProLink5 (SATA) Port B error
F 0 8 Fan control error
F 0 9 Internal voltage error
F 0 A Temperature error
F 0 B ID error
F 0 C Serial flash error
ERR 0 1 Code 2
All tests passed
ISAC/CAN error
F0B, F09, F0A, F0C, F0D, F0E
F01, F02
Unused, future use
F10, F0F
F13
F08
F05, F06
0
7
6
5
4
3
2
1
14
13
12
11
10
15
8
9
Unused, future use
Figure 35: PLR615X Self-Test Mode Messages