Daktronics PROLINK ROUTER 605 Series, Installation And Maintenance Manual, Page: 10 / 54

Introduction
6
Indicator Description
DS1-3 7-Segment display
DS4 VIN power indicator
DS5 3.3V power indicator
DS6 2.5V power indicator
DS7
ProLink5 Port A transmit indicator
• On – port is not configured
• Off – port is configured but not transmitting diagnostics
• Toggling – port is transmitting diagnostics*
DS8
ProLink5 Port A receive indicator
• On – port is not receiving valid signal
• Off – port is receiving valid signal but not receiving diagnostics
• Toggling – port is receiving diagnostics*
DS9
ProLink5 Port B transmit indicator
• On – port is not configured
• Off – port is configured but not transmitting diagnostics
• Toggling – port is transmitting diagnostics*
DS10
ProLink5 Port B receive indicator
• On – port is not receiving valid signal
• Off – port is receiving valid signal but not receiving diagnostics
• Toggling – port is receiving diagnostics*
DS13
ProLink6 fiber Port A receive Indicator 0
• On – port is not receiving valid signal
• Off – port is receiving valid signal but not receiving data from a ProLink6 master**
• Toggling once per second – port is connected to a primary ProLink6 master port
• Toggling 10 times per second – port is connected to a secondary ProLink6 master
port
DS14
ProLink6 fiber Port A receive Indicator 1
• On – port is not receiving valid signal
• Off – port is receiving valid signal but not receiving diagnostics***
• Toggling – port is receiving diagnostics requests*
DS15
ProLink6 fiber Port B receive Indicator 0
• On – port is not receiving valid signal
• Off – port is receiving valid signal but not receiving data from a ProLink6 master**
• Toggling once per second – port is connected to a primary ProLink6 master port
• Toggling 10 times per second – port is connected to a secondary ProLink6 master
port
DS16
ProLink6 fiber Port B receive Indicator 1
• On – port is not receiving valid signal
• Off – port is receiving valid signal but not receiving diagnostics***
• Toggling – port is receiving diagnostics requests*
DS19 ISAC indicator toggles with ISAC activity
DS20 Fan jack indicator turns on when voltage is active
* The receive indicator toggles at the rate that the diagnostic requests are received at
the port. When active, indicators that toggle with received/transmitted diagnostics may
toggle at a
1
/
2
interval, then remain idle for up to 60 seconds.