Version 3 Software Operation
10
3 Version 3 Software Operation
Using the Venus
®
1500 Version 3 Software
Refer to the
Venus
®
1500 Version 3 Operation Manua
l for the operation of the Venus
®
message programming software.
Using the Switch Interface
Messages are created using the Venus
®
1500 Software. All switch interface controlled
messages must be located in a library called “SWITCH”, and be named “MSG001”
through “MSG032.” MSG001 is the message for SW1, MSG002, is the message for SW2, etc.
This allows the switch interface to determine what message to run for each switch.
The messages will be stored at the display only. When the switch to run the message
is closed, the corresponding message will run. The Venus
®
1500 Software will show the
messages as stored messages, except for those that are currently running.
