Access Internal Components
9
4 Access Internal Components
Rear Access
BLD series digital billboards have lift-off doors that
are secured with a tab in the top-left corner. Refer
1�
Place fingers in the slot located at the top-left
2�
While pulling up on the handle in the center of
the door, pull the top-left corner of the door
outward so it clears the tab located on the
display back sheet. Refer to
.
3�
Lift the door upward to disengage its tabs
from the slots on the display’s back sheet.
.
4�
Lower door until its top lip is free.
To completely move the door out of the way,
disconnect the lanyard connected to the door.
Front Access
Remove modules from the display front to gain
access to the cabinet’s interior. Refer to the steps
Remove a Module (Front Access) (p�10)
.
Figure 8:
Rear Access Door
Figure 9:
Removing Door
Figure 10:
Removing Door
