[4]
MAN #650500G
VFD3 Setup Continued:
Obtaining oil pressure from the BIM-01-2 (if available)
•
Hold the SW1 switch from the instrument system control box while turning the key on.
o
The speed display should show
and the message display should show
SETUP
.
•
Release SW1. Tap SW1 until
and
OIL
are displayed.
•
Press and hold SW1 for at least 3 seconds, until
changes to “-”. The displays should show
and
SENDER
.
•
Press and hold SW1 for at least 3 seconds, until
changes to “-”. The speed display will show the current
setting.
•
Tap SW1 until
and
BUS
are displayed.
•
Press and hold SW1 until “-” and
DONE
are displayed.
•
Tap SW1 until
and
DONE
are displayed.
•
Press and hold SW1 until “-” and
DONE
are displayed.
Summary of Contents for BIM-01-2
Page 11: ... 11 MAN 650500G Notes ...
