Keyboard command tips
Please observe the following notes on using keyboard commands:
1. Start all commands by pressing and releasing the left control key.
2. All UltraView Pro commands are time guarded. Do not wait more than
two seconds between keys. This is a feature to prevent someone from en-
tering commands by mistake.
3. Do not use the numeric keypad to enter any commands. Use the numeric
keys below the function keys.
4. Letter commands are not case sensitive, and are shown in upper case
for clarity only. Do not use the shift key.
5. There are two sets of plus and minus keys. The legends on the ones in
the numeric keypad are consistent from country to country. The legends on
the ones to the left of the backspace key vary by country, but you still use
these key positions.
40
ULTRAVIEW PRO INSTALLATION AND OPERATION MANUAL
Always use these numeric keys
not the ones on the keypad
Always begin a command by pressing and
releasing the left control key
Do not use numbers on
numeric keypad for commands
You can use either set of - and + keys
The ones on the left have
key tops that vary by country
US keyboard is shown
Figure 16 Keyboard command tips