Configure system:
Keyboard
This item only applies to multi-platform units. For such units, the type of
keyboard is auto-detected at power-up of the UltraView Pro. If the key-
board is not attached at power-up , it will default to PC. If either a Sun or Ap-
ple keyboard is attached after power-up, it will not be recognized and you
must power the UltraView Pro off and back on for it to be recognized.
When using a Sun keyboard, the language type of the keyboard is acquired
from the keyboard automatically and is displayed here. The language type
can be either: US, US/UNIX, French, Danish, German, Italian, Nether-
lands/Dutch,
Norwegian,
Portuguese,
Spanish,
Swedish/Finnish,
Swiss-French, Swiss-German, United Kingdom, Korean, Taiwan, Japan,
French-Canadian, or unknown. The value recognized is reported to a Sun
computer when it requests this information when booting.
If this is a multi-platform unit and you use a PC keyboard then you can
change the style of PC keyboard mapping to Sun and Apple computers.
This allows you to use either a 101/102 key keyboard or a 104/105 key key-
board. See the keyboard mapping section on page 36 for exact details.
Configure system:
Mouse
This item is only used when configuring a PC mouse. On PC-only models
you have a choice between PS/2 or PS/2 wheel and serial. On multi-plat-
form models you have a choice between PS/2 or PS/2 wheel, serial 2-but-
ton, and serial 3-button. To change the mouse type, hit enter while mouse
is highlighted. An input selection box pops up as shown in Figure 7.
14
ULTRAVIEW PRO INSTALLATION AND OPERATION MANUAL
Figure 7 Configure system page - Configuring the mouse
Keyboard and mouse type
Keyboard
PC
Configure system
Scan settings
Scan time (seconds)
5
Scan mode
Off
Power on scan
Off
Type of mouse used, if PS/2 mouse then wheel is auto-detected
Mouse
PS/2
Expansion
Maximum computers
8
Expansion units
0
Expansion width
16
Keyboard typematic
Rate (keys/sec)
20
Delay
Fast
Serial 2-button
Serial 3-button
PS/2 or PS/2 wheel