If you decided to connect the computer while it is powered off, then
boot it and observe that the corresponding power LED on the front
panel lights. Verify the keyboard and mouse work normally once it
completes its booting process.
5.4
Repeat for all the other computers.
Step 6. Configure other desired functions
The most common functions to also configure are:
COMPUTER NAMES - see page 19
The names are generated by the on-screen display when switching to a
port and from the computer select window. They provide a convenient ref-
erence for knowing to which computer you are switched.
OVERLAY - see page 22
This is mostly cosmetic for setting up colors and positions of the computer
name label and the computer select window. Here though you also config-
ure the screen saver, resolution, font, and fadeout time.
SECURITY - see page 26
If you wish to password protect your configuration settings and access to
the computers, you should read this section.
Also review the following:
HOW TO SWITCH - see page 28 and 29
There are five ways to switch. You can switch from the computer select
window, numeric keyboard commands, plus/minus keyboard commands,
and the front panel. The fifth way is from the RS232 port, see page 36.
KEYBOARD COMMAND SUMMARY - see page 39
Lists all of the keyboard commands that you can enter, their syntax, and
what they do.
KEYBOARD COMMAND TIPS - see page 40
Describes the proper way to enter keyboard commands and a few things to
watch out for.
9
ULTRAVIEW PRO INSTALLATION AND OPERATION MANUAL