and hit enter. The input box disappears and the new value is then shown in
the scan time field.
Configure system:
Scan mode
This item turns scanning on or off. To change the scan mode, press enter
while scan mode is highlighted. An
off/on input
box appears. Use the arrow
keys to select on or off and hit enter. The input box disappears and the set-
ting of off or on is shown in the scan mode field. You can also use the con-
trol S and control X commands to turn the scan mode on or off, see page 30
for more information.
Configure system:
Power on scan
This item turns scanning on or off upon power-up of the UltraView Pro. To
change the power on scan, press enter while power on scan is highlighted.
An
off/on input
box appears. Use the arrow keys to select on or off and hit
enter. The input box disappears and the setting of off or on is shown in the
power on scan field.
Configure system:
Typematic rate
This setting is available with PC keyboards only and is used to adjust the
user preference of the way the keyboard acts when holding a key down to
repeat a key. The rate is the speed at which the keys are sent in keys/sec-
ond.
To change the typematic rate, press enter while typematic rate is high-
lighted. An
input new value
box appears. Use the numeric keys to input a
new value from 0 to 31 keys/second and hit enter. The input box disap-
pears and the new value is then shown in the typematic rate field. Please
note that PC keyboards do not have a linear rate in keys/second. Refer to
Table 3 to get the exact rate.
Table 3. Typematic rate
Rate
Keys/sec
Rate
Value
Rate
Keys/sec
Rate
Value
Rate
Keys/sec
Rate
Value
Rate
Keys/sec
Rate
Value
30.0
31
15.0
23
7.5
15
3.7
7
26.7
30
13.3
22
6.7
14
3.3
6
24.0
29
12.0
21
6.0
13
3.0
5
21.8
28
10.9
20
5.5
12
2.7
4
20.0
27
10.0
19
5.0
11
2.5
3
18.5
26
9.2
18
4.6
10
2.3
2
17.1
25
8.6
17
4.3
9
2.1
1
16.0
24
8.0
16
4.0
8
2.0
0
17
ULTRAVIEW PRO INSTALLATION AND OPERATION MANUAL