DAKO DAKO 5140, Use And Maintenance Manual

Page: 13 / 28

13
DAKO 5140
ENGLISH
DAKO 5140
This instruction manual is an integral part of the machine
supply and must accompany it whenever it is moved.
The manual must be kept carefully for the duration of
the machine's life and must in all cases be available for
1 Main switch
2 Lid handle
3 Breakaway torque control knob
4 Portlight
5 Optical reader
6 Optical reader cable
7 Lid
8 Temperature setting device
9 Control panel
10 Side panel
11 Front panel
12 Dataplate
13 Power cable
14 Panel fastening screws
15 Water drain
16 Lock
1 Fixed counterweight
2 Mobile counterweight
3 Handwheel
4 Flask holder check pins
5 Flask holder
6 Crucible holding plate
7 Crucible
8 Flask
9 Crucible lid fastener
10 Flask bearing plate
at least 10 years, it must therefore be kept in a known
location and be made available to all the personnel
concerned.
Do not connect or start up the machine before you have
read this manual.
TECHNICAL SPECIFICATIONS
The DAKO 5140 machine is available in the following
versions:
220 V 50 Hz
220 V 60 Hz
240 V 50 Hz
Max. power rating
2860 W
Width 64cm + 5cm main cable
Depth 55 cm
Height 88cm + 5.5cm for optical reader
Net weight 89 Kg
Sound pressure level <70 dB(A)
Time required for melting 30 gr of CrCo (four ingots
weighing 10 g each) at the maximum power rating, with
C15N crucible: approx. 55 sec.
PURPOSE OF THE EQUIPMENT
DAKO 5140 is an electronic casting machine equipped
with microprocessor supervision system, and intended
for casting the alloys to be used in the dental field. Its
function is to induction melt the alloy in a suitable crucible
and then, when the alloy is liquid, to inject it into a parallel
mould, previously conditioned.
Any use other than above mentioned has to be
considered as an improper use, which relieves the
manufacturer from any responsibility for damages of any
kind whatever, furthermore involving the user to forfeit
with any guarantee right of the device.
Fig.2
Fig.1
1
3
2
14
11
15
10
8
7
9
6
1
5
4
3
2
12
13
10
8
9
5 6
4
7
16