IV. Instructions before Use
Dakewe (Shenzhen) Medical Equipment Co., Ltd.
45
www.dakewemedical.com
Step 3: If there is an error message, the user should check the user name and password, and re-enter
the information.
Figure 4- 54 login interface
Select
“
Add User
”
on the
“
User Management
”
interface. After the user name
is created, the user can find the new user name in the
“
User Name
”
drop-down list
on the login page.
The account, if not logged out, will be automatically logged in the next time
when the software boots.
3. Add User
A pop-up box of “Add User” will appear after the user clicks the “Add User” button on the user
management interface (Figure 4-55). Touch the user name, ID, password input boxes in sequence and enter
the information after the virtual keyboard pops up. Click the “Confirm” button and the user is added. The
user accounts are displayed in the user list based on the creation order. Operator cannot create any account.
Account logout
Click "Username" under the Status Bar and select "Log out" in the drop-down box so that the account
will be logged out and switched to the Visitor (User) role and the software homepage will be restored.
Figure 4- 55 Add user interface
