Dakewe(Shenzhen)Medical Equipment Co,. Ltd
10
V4.1
2.2
Warning
The safety device installed by the manufacturer on this instrument only constitutes the basis of
accident prevention. The primary responsible party for the safe operation is the organization,
followed by the personnel assigned by the organization to operate, maintain or repair the
instrument. In order to ensure the smooth operation of the instrument, be sure to observe the
following instructions and warnings.
2.2.1 Warning - Signs on the Instrument
2.2.2 Warning – Transport and Installation
Do not remove or modify protective devices of the instrument and accessories.
Only authorized maintenance personnel are allowed to repair the instrument
and dispose of the instrument’s internal components.
The warning triangle is displayed on the instrument to ensure that correct
operating instructions defined in this Manual must be observed during
operation and replacement. Failure to follow these instructions may result in
accidents, personal injuries, and damages to the instrument or accessories.
This warning label is used on the surface of the instrument that will be hot
during operation.
Touching these surfaces may cause burns.
The instrument must be kept upright after unpacking.
Do not grasp the handle of the handlewheel or the knob of setting the slice thickness to carry
the instrument.
It is strictly forbidden to disassemble or modify the protective equipment on the instrument
and accessories.
