226
GB
When the “system control” function is being used, the receiver memorises in the list of events any
events that may have taken place when the system was in armed status.
This function requires the “ARS” input to be connected to an output on the hardwired control
panel that is able to repeat the hardwired system’s armed/disarmed status.
The existing “list of events” is erased in the following cases:
• when the test mode is activated,
• when the test mode is deactivated,
• when the “ELEMENT LIST” function in the “Read events” menu is activated,
• when the system is armed (only when the “system control” function is configured).
The type of alarm (intrusion or tamper) is indicated via specific messages:
• Alarms for intrusion,
• Tamper alarm for device opening or removal.
Example:
events list consultation.
t
Active zones
>
Others ...
t
Fault
>
Others ...
OK
Read Events
>
Others ...
t
Alarms
Zone 2 Detec.
02
t
Alarms
Zone 2 Detec.
05
t
Alarms
Zone 7 Detec.
17
t
Tamper
Zone 8 Detec.
29
t
Tamper
Control
2
t
Tamper
Module
t
Read Events
>
Erase liste
OK
Read Events
< Exit
Read Events
>
Others ...
Summary of Contents for 785-21X
Page 1: ......
