X
Apply the parking brake.
X
Open the drawer on the front-passenger
side.
X
Lever off cover
:
on the center console
from bottom edge
;
using a flat, blunt
object.
X
Pull cover
:
in the direction of the arrow.
X
Pull yellow release
=
behind the trim up
and simultaneously press release but-
ton
?
on the selector lever.
X
Shift the selector lever to N or P.
Replacing the bulbs
Useful information
G
WARNING
Bulbs, lamps and connectors can get very
hot when operating. If you change a bulb,
you could burn yourself on these compo-
nents. There is a risk of injury.
Allow these components to cool down
before changing a bulb.
Observe the following rules when changing
bulbs:
R
only replace bulbs when the engine is
switched off.
R
do not use bulbs that have been dropped or
show signs of visible damage, e.g.
scratches.
R
do not touch the glass bulb with your bare
hands.
R
only use bulbs in enclosed lamps designed
for that purpose.
R
only install spare bulbs of the same type
and with a specified voltage.
R
do not allow bulbs to come into contact
with moisture.
R
have LEDs changed at qualified specialist
workshops only.
Change only the bulbs described below your-
self in accordance with the specified bulb
types.
Replacing front bulbs
Replacing low-beam headlamps and
high-beam headlamps
X
Switch off lights.
X
Open the service cover.
X
Remove cover
:
.
X
Pull out the connector.
X
Press retainer
;
inwards and to the left.
X
Pull the bulb out.
X
Insert the new bulb.
X
Lock retainer
;
.
X
Insert the connector.
X
Replace and engage cap
:
.
Replacing the front turn signal lamps
160
Replacing the bulbs
>>
Dealing
with
accidents
and
breakdowns
.
Summary of Contents for Smart fortwo cabrio
Page 194: ...192...
