Daimler Freightliner Cascadia 2021 Driver Manual Download

Page: 80 / 322

Telltales, Indicator Icons, and Messages

Driving Safety

Telltale

Color

Description

Related Messages

Amber

Active Brake Assist
Unavailable
(GHG14 and newer)

Indicates the Active Brake Assist system is
not available.

04/22/2016

f611353

ICUC Caution

ICC5
Telltale

Amber

Lane Departure
Unavailable

Indicates that lane departure warning is
disabled due to minimum speed, lack of
lane markings, or system not being
available.

NOTE: Only on vehicles equipped with
Detroit Assurance radar.

ICUC
Telltale

Amber

Lane Departure
Unavailable

Indicates that lane departure warning is
disabled due to minimum speed, lack of
lane markings, or system not being
available.

NOTE: Only on vehicles equipped with
Detroit Assurance radar.

06/28/2016

f611372

ICUC Caution

ICC5
Telltale

Amber

Adaptive Cruise
Control Not
Available

Indicates that Adaptive Cruise Control (ACC)
is not available

NOTE: Only on vehicles equipped with a
radar-based collision warning and mitigation
system (CWS/CMS).

ICUC
Telltale

Amber

Adaptive Cruise
Control Not
Available

Indicates that Adaptive Cruise Control (ACC)
is not available

NOTE: Only on vehicles equipped with a
radar-based collision warning and mitigation
system (CWS/CMS).

04/22/2016

f611354

ICUC Caution

If ACC is not available,

Active Lane Assist (ALA)

will not be available.

Amber

IPPC Error

Instruments

3.57

Summary of Contents for Freightliner Cascadia 2021



































































































































































































































































































































Search results

Summary of Contents for Freightliner Cascadia 2021

Reviews:

Related manuals for Freightliner Cascadia 2021

Brands by name

Popular brands

Daimler Freightliner Cascadia 2021, Driver Manual

Search results

Summary of Contents for Freightliner Cascadia 2021

Reviews:

Related manuals for Freightliner Cascadia 2021

Brands by name

Popular brands