Daimler Freightliner Cascadia 2021, Driver Manual, Page: 146 / 322

Adding Hazardous Dangerous Goods to
the Vehicle Profile
Hazardous materials includes, in part, explosives,
gases, flammable liquids, flammable solids, oxidizers
and organic peroxides, toxic and infectious sub-
stances, radioactive substances, and corrosive sub-
stances.
NOTE: The value 0 equals No Hazardous Mate-
rials and causes the system not to check for
route restrictions.
1. Select My Vehicle
2. Select HAZMAT. A list of possible dangerous
goods settings appears.
3.
Select a class or classes of hazardous material
by sliding the radio button to the right. The active
radio button(s) will be highlighted in color.
4. Press the back arrow next to the Setup Hazard-
ous Materials title on the screen. Check that the
appropriate hazardous material icons have ap-
peared on the My Vehicle screen.
Adjusting the Display
Turning On Automatic Switching to Night
View
NOTE: Night View can be turned on or off by
pressing the Night View icon located at the bot-
tom right of the ····Menu screens.
When the setting is active, the display automatically
switches to night view when dark.
1. Select ····Menu.
2. Select Settings.
3. Select Appearance.
4. Select Display.
5. Select Switch To Night Colors When Dark. The
radio button is highlighted in color when the set-
ting is active.
Adjusting Arrival Information on the Route
Bar
The driver can set the type of arrival information to
display on the route bar and whether the information
is displayed for the final destination or for the next
intermediate destination.
1. Select ····Menu.
2. Select Settings.
3. Select Appearance.
4. Select Route bar.
5.
Select Arrival information.
6. Select a setting; the active setting is indicated by
a dot highlighted in color.
Adjusting Route Information on the Route
Bar
The driver can set the route information to display on
the route bar, such as gas stations, parking lots, rest
areas, toll zones, and ferries.
1. Select ····Menu.
2. Select Settings.
3.
Select Appearance.
4. Select Route bar.
5. Select Route information.
6. Select desired setting(s); active settings are high-
lighted in color.
Displaying the Time
When this function is active, the current time appears
at the bottom of the route bar.
1.
Select ····Menu.
2. Select Settings.
3.
Select Appearance.
4. Select Route bar.
5. Select or Deselect Show Current Time. If Show
Current Time is on, the option is highlighted in
color.
Displaying a Wider Route Bar
NOTE: Both map and route bar views can be
enlarged to show more detail or zoomed out on
to show less by using a two-finger swipe.
When Show Wide Route Bar If Possible is on, a
wider route bar appears. The wider route bar con-
tains additional route information, e.g. journey time
and distance from a traffic jam.
1. Select ····Menu.
2. Select Settings.
3. Select Appearance.
Driver Assistance Features
7.3