Daimler Freightliner Cascadia 2021, Driver Manual

Page: 239 / 322

Functionality, Automated/Automatic Transmission Shift Control
Function/Switch Action/Position Request
Gear(Detroit
Automated
Transmissions) Detroit Automated Transmissions
Short pull on the lever Upshift, single gear
Pull on the lever in quick repetitions Upshift, multiple gears
Short push on the lever Downshift, single gear
Push on the lever in quick repetitions Downshift, multiple gears
Gear (Eaton
Automated
Transmissions) Eaton Automated Transmissions
Short pull on the lever Upshift, single gear
Pull on the lever in quick repetitions Upshift, multiple gears
Short push on the lever Downshift, single gear
Push on the lever in quick repetitions Downshift, multiple gears
While in automatic drive mode, long push on
the lever Downshift to low mode
While in low mode, pull on the lever Exits low mode and returns to automatic drive mode
While in reverse mode, push on the lever Selects deep reverse gear
While in deep reverse gear, pull on the lever Upshifts to standard reverse gear
Gear (Allison
Automatic
Transmissions) Allison Automatic Transmissions
Short pull on the lever Upshift, single gear
Pull on the lever in quick repetitions Upshift, multiple gears
Short push on the lever Downshift, single gear
Push on the lever in quick repetitions Downshift, multiple gears
While in automatic drive mode, long push on
the lever Downshift to low mode
While in low mode, pull on the lever Exits low mode and returns to automatic drive mode
While in reverse mode, push on the lever Selects deep reverse gear (only on 7-speed 4000
Series transmissions)
While in deep reverse gear (only on 7-speed
4000 Series transmissions), pull on the lever Upshifts to standard reverse gear
Engine Brake
*
Engine Brake Functions
Lever at position 0 (top) Engine brake off
Lever at position 1 Low intensity
Lever at position 2 Medium intensity
Lever at position 3 (bottom) High intensity
*
For functions with cruise control active, see Chapter 7 .
Table 17.1, Functionality, Automated/Automatic Transmission Shift Control
Engine Brake
The engine brake is controlled by the lever position
(as shown in
Fig. 17.2 ). At the top position, the en-
gine brake is off, and at the three lower positions, the
engine brake is on and the intensity (low, medium,
high) increases with each step down. For more infor-
mation about using the engine brake, see
Chapter 15 .
NOTE: Using the engine brake with cruise con-
trol can be used to activate Descent Control
Mode or Deceleration Mode. For more informa-
tion, see "Cruise Control" in
Chapter 7 .
Power Up and Shift into Gear
1. With the parking brake set and Neutral (N) se-
lected on the shift control, turn the ignition switch
to the ON position.
2. Start the engine.
3.
Apply the service brake.
4. Select the desired starting gear.
5. Release the parking brake.
6. Release the service brake and apply the accel-
erator.
Automated and Automatic Transmissions
17.2