Daimler Freightliner Cascadia 2021, Driver Manual, Page: 49 / 322

•
If installed, an Active Brake Assist (ABA) popup
disclaimer appears on the driver display
screen.
•
If ignition status is set to Adaptive Cruise Con-
trol (ACC), the tripmeter and odometer values
are shown on the driver display screen.
•
If the ignition is set to ON, all ICC5 screens
and options are available.
IMPORTANT: If any red or amber warnings do
not go out after the self-check completes, take
the action outlined in the
Warnings, Indicators,
and Messages section in this chapter, then take
the vehicle to an authorized Freightliner service
facility as soon as possible.
ICC5 Screen Navigation
NOTE: The brightness of the ICC5 display
screens can be adjusted in Settings.
The ICC5 is equipped with two screens. The driver
display screen in the dashboard in front of the driver
and the infotainment screen.
The driver display screen provides basic vehicle and
environmental information. Battery voltage, outside
ambient air temperature, current time, and current
compass direction are displayed across the top of
the screen. Information such as fuel gauge, current
speed, gear, odometer reading, and primary and sec-
ondary air pressure gauges display on the bottom of
the screen. Telltales are displayed at both the top
and bottom of the screen.
The driver display screen provides information in two
different modes: a base screen layout and a pilot
screen layout.
The base screen consists of a digital tachometer/
speedometer in the center of the screen. See
Fig. 3.49 .
The pilot screen moves the speedometer and ta-
chometer to the bottom of the screen to provide driv-
ing assistance information in the screen’s center. See
Fig. 3.50 .
The infotainment screen is a touch screen and dis-
plays the standard gauges as well as information
about the cab and chassis. It also serves as the
f611580b 06/28/2019
1
2
3
1. A-Panel: Driver Display 2. B-Panel: Infotainment Display 3. USB2 Ports
Fig. 3.48, ICC5 Dual Display Screens and USB2 ports
Instruments
3.26