Daimler Freightliner Cascadia 2021, Driver Manual, Page: 68 / 322

3. Select the three dots to the right of the phone to
access that phone’s options.
4. Select Reception Volume and set the volume.
5.
Select the back arrow.
6. Select Transmission Volume and set the volume.
7.
Return to the main phone screen by pressing the
back arrow or selecting the physical phone but-
ton at the bottom of the infotainment screen.
Searching for a Contact and Making a
Call
NOTE: A phone must be active to access these
settings.
1. Open the Phone menu.
2.
Select the magnifying glass icon for Search. A
keyboard opens.
3.
Start entering the first or last name of a contact
or a partial or full phone number. As you type a
number will appear next to the icon for the re-
sults list showing how many phone contacts
have that series of characters.
4. When the number is small enough, select the
results list icon to the right of the search box. A
results list appears.
5. Select the desired contact. The contact card ap-
pears.
6. Select the desired contact phone number. A call
is placed.
Starting Phone Voice Recognition
NOTE: When in two phone mode, the phone
voice recognition is only available on the pri-
mary phone.
Press and hold the Voice button on the right-hand
OFN steering wheel pod for at least one second.
Phone voice recognition is now available.
Ending Phone Voice Recognition
Press either the Mute Volume or End Call button on
the right-hand OFN steering wheel pod. Mobile
phone voice recognition has ended.
Making a Call
1. Open the Phone menu. The primary phone menu
appears.
2. Select the number pad icon or select Contacts or
Call List menu.
2.1 If using the number pad, enter a number.
Select the green phone receiver icon. The
call is made.
2.2
If using the Contact’s menu, select a con-
tact. The contacts information is shown.
Select a phone number. The call is made.
2.3 If using the Call List menu, select the
phone number. The call is made.
Accepting a Call
There are two ways to accept a call:
•
Press the Accept Call button on the right-hand
OFN steering wheel pod.
•
Select the accept call button on the infotain-
ment screen.
Ending or Rejecting a Call
There are two ways to end or reject a call:
•
Press the End Call button on the right-hand
OFN steering wheel pod.
•
Press the end call button on the infotainment
screen.
Putting an Active Call on Hold and
Taking if Off Hold
NOTE: The function and behavior of taking calls on
and off hold and accepting and rejecting waiting calls
can vary depending on the phone, phone plan, and
network provider. If functions and behavior vary from
these directions, consult the manufacturer’s operating
instructions and provider information.
A call on hold can be ended by selecting the
End Call button on either the right-hand OFN
steering wheel pod or the infotainment screen.
1. Select the active call number. The call is put on
hold.
2. Select the active call number. The call is taken
off hold.
Accepting a Waiting Call in Single Phone
Mode
If there is an incoming call while a call is being con-
ducted, a screen notification is shown. Depending on
Instruments
3.45