background image

8 Troubleshooting

Installation and operation manual

10

FXMQ-A

VRV system air conditioner

3P701545-1 – 2022.07

NOTICE

▪ Do  NOT  use  gasoline,  benzene,  thinner  polishing

powder  or  liquid  insecticide. 

Possible  consequence:

Discoloration and deformation.

▪ Do  NOT  use  water  or  air  of  50°C  or  higher. 

Possible

consequence: 

Discoloration and deformation.

7.2.1

To clean the air filter

INFORMATION

Air filter for this unit is an optional equipment. Refer to the
option list for available air filter option for your unit.

When to clean the air filter:

▪ Rule  of  thumb:  Clean  every  6  months.  If  the  air  in  the  room  is

extremely contaminated, increase the cleaning frequency.

▪ Depending  on  the  settings,  the  user  interface  can  display  the

"Time  to  clean  filter" 

notification.  Clean  the  air  filter  when  the

notification displays.

▪ If  the  dirt  becomes  impossible  to  clean,  change  the  air  filter

(= optional equipment).

How to clean the air filter:

1

Remove  the  air  filter

  (composed  of  3  equal  parts).  For  the

removal  procedure  8  mm  pre-filter  refer  to  the  reference  guide
of  the  indoor  unit.  For  other  air  filter  types  refer  to  the
installation manual of the filter chamber.

2

Clean the air filter.

 Use a vacuum cleaner or wash with water.

If  the  air  filter  is  very  dirty,  use  a  soft  brush  and  neutral
detergent.

3

Dry the air filter in the shadow.

4

Re-attach the air filter.

5

Turn ON the power.

6

To  remove  warning  screens,  see  the  reference  guide  of  the
user interface.

7.2.2

To clean the air outlet

WARNING

Do  NOT  let  the  indoor  unit  get  wet. 

Possible

consequence: 

Electrical shock or fire.

Clean with a soft cloth. If it is difficult to remove stains, use water or
a neutral detergent.

7.3

About the refrigerant

This  product  contains  fluorinated  greenhouse  gases.  Do  NOT  vent
gases into the atmosphere.

Refrigerant type: R410A

Global warming potential (GWP) value: 2087.5

NOTICE

Applicable  legislation  on 

fluorinated  greenhouse  gases

requires  that  the  refrigerant  charge  of  the  unit  is  indicated
both in weight and CO

2

 equivalent.

Formula  to  calculate  the  quantity  in  CO

2

  equivalent

tonnes:

  GWP  value  of  the  refrigerant  ×  total  refrigerant

charge [in kg]/1000

Contact your installer for more information.

WARNING

▪ The refrigerant in the system is safe and normally does

NOT  leak.  If  the  refrigerant  leaks  in  the  room,  contact
with a fire of a burner, a heater or a cooker may result
in a harmful gas.

▪ Turn  OFF  any  combustible  heating  devices,  ventilate

the room and contact the dealer where you purchased
the unit.

▪ Do NOT use the system until a service person confirms

that the portion where the refrigerant leaks is repaired.

8

Troubleshooting

If one of the following malfunctions occur, take the measures shown
below and contact your dealer.

WARNING

Stop  operation  and  shut  OFF  the  power  if  anything
unusual occurs (burning smells etc.).

Leaving  the  unit  running  under  such  circumstances  may
cause  breakage,  electrical  shock  or  fire.  Contact  your
dealer.

The system MUST be repaired by a qualified service person.

Malfunction

Measure

If a safety device such as a fuse, a
circuit breaker or a residual current
device frequently actuates or the ON/
OFF switch does NOT function properly.

Turn OFF all main power
supply switches to the
unit.

If water leaks from the unit.

Stop operation.

The operation switch does NOT function
properly.

Turn OFF the power
supply.

If the user interface displays 

.

Notify your installer and
report the error code. To
display an error code see
the reference guide of the
user interface.

If  the  system  does  NOT  operate  properly  except  for  the  above
mentioned cases and none of the above mentioned malfunctions is
evident,  investigate  the  system  in  accordance  with  the  following
procedures.

INFORMATION

Refer  to  the  reference  guide  located  on 

https://

www.daikin.eu

  for  more  troubleshooting  tips.  Use  the

search function   to find your model.

If  after  checking  all  above  items,  it  is  impossible  to  fix  the  problem
yourself, contact your installer and state the symptoms, the complete
model name of the unit (with manufacturing number if possible) and
the installation date (possibly listed on the warranty card).

Summary of Contents for VRV system FXMQ200AXVMB

























Reviews: