![background image](http://html1.mh-extra.com/html/daikin/vrv-iii-rqq8-48py1/vrv-iii-rqq8-48py1_service-manual_2459193078.webp)
Diagnosis Servis
68
Penyelesaian Masalah Menggunakan Remote Kontrol
Si341213
Press the SET (BS2) button once to
display "Second digit" of error code.
<Confirmation of error 1>
<Confirmation of error 2>
<Confirmation of error 3>
Press the SET (BS2) button once to
display "
master
or
slave
1 or
slave
2
or
slave
3" and "error location".
<Confirmation of error 4>
Indikasi kode kesalahan menggunakan PCB unit outdoor
<Mode monitor>
*
<Selection of setting item>
*
Detail
description
on next
halaman.
Press the SET (BS2) button once to
display "error location".
Press the MODE (BS1) button and
returns to “Mode pengaturan 1”.
Press the RETURN (BS3) button and
switches to the initial status of
“Monitor mode”.
Kesalahan
Kode kesalahan
Deskripsi kesalahan
Deskripsi kesalahan (PGF)
Remote
kontrol
Ketidaknormalan PCB
PCB Rusak
E1
Ketidaknormalan tekanan tinggi
Saklar tekanan tinggi diaktifkan
E3
Aktuasi sensor tekanan rendah
Pe Rusak
E4
Kunci Motor Kompresor INV.
E5
Kunci/Arus Berlebih Motor
Kompresor STD
STD 1
E6
STD 2
Ketidaknormalan motor kipas unit
outdoor
Motor kipas 1 rusak
E7
Motor kipas 2 rusak
Ketidaknormalan kumparan katup
ekspansi elektronik (Y1E ~ Y3E)
Utama
E9
Pengisian refrigeran
Penukar panas
subcooling
Suhu pipa pembuangan tidak normal Td Rusak
F3
Pengisian Refrigeran Berlebih
Suhu penukar panas tidak normal
F6
Ketidaknormalan sistem saklar
tekanan tinggi
H3
Sinyal motor kipas unit outdoor tidak
normal
Sinyal penentuan posisi motor kipas
1
H7
Sinyal penentuan posisi motor kipas
2
Ketidaknormalan termistor
Termistor (Udara outdoor)
H9
Ketidaknormalan sensor tekanan
tinggi
J1
Ketidaknormalan sensor arus
STD 1
J2
STD 2
Ketidaknormalan termistor (pipa
pembuangan)
Untuk kompresor INV.
J3
Untuk kompresor STD 1
Untuk kompresor STD 2
Ketidaknormalan termistor (pipa
hisap)
J5
Ketidaknormalan termistor (deicer
penukar panas)
J6
Ketidaknormalan termistor (pipa
cairan)
J7
ketidaknormalan termistor (penerima
ketinggian cairan, penerima outlet
ventilasi gas)
J8
Ketidaknormalan termistor (outlet
penukar panas
subcooling
)
J9
Ketidaknormalan sensor tekanan
tinggi
S1NPH Rusak
JA
Ketidaknormalan sensor tekanan
rendah
S1NPL Rusak
JC
: ON
: Berkedip
: OFF
To enter the monitor mode, press the
MODE (BS1) button when in “Setting
mode 1
”.
Refer to P.50 for Monitor mode.
Press the SET (BS2) button and set
the LED display to a setting item.
Refer to P.50 for Monitor mode.
Press the RETURN (BS3) button
once to display "First digit" of error
code.