background image

SPLIT SYSTEM Air Conditioners

Installation manual

2

CONTENTS

1. SAFETY CONSIDERATIONS ..........................................2

2. BEFORE INSTALLATION.................................................3

3. SELECTING INSTALLATION SITE ..................................4

4. PREPARATIONS BEFORE INSTALLATION........................ 5

5. INDOOR UNIT INSTALLATION........................................6

6. REFRIGERANT PIPING WORK ......................................7

7. DRAIN PIPING WORK.....................................................9

8. ELECTRIC WIRING WORK...........................................10

9. WIRING EXAMPLE AND HOW TO SET THE REMOTE 

CONTROLLER...............................................................10

10. ATTACHING THE SUCTION GRILLE, THE DECORATION 

PANELS AND THE PROTECTION NET ........................12

11. FIELD SETTING ............................................................12

12. TEST OPERATION ........................................................13

1.

SAFETY CONSIDERATIONS

Please read these “SAFETY CONSIDERATIONS” carefully 
before installing air conditioning equipment and be sure to 
install it correctly. After completing the installation, make sure 
that the unit operates properly during the start-up operation.
Please instruct the customer on how to operate the unit and 
keep it maintained.
Also, inform customers that they should store this installation 
manual along with the operation manual for future reference.
This air conditioner comes under the term “appliances not 
accessible to the general public”.

Meaning of danger, warning, caution and note symbols.

DANGER

  ...............Indicates an imminently hazardous 

situation which, if not avoided, will 
result in death or serious injury.

WARNING

  .............Indicates a potentially hazardous situ-

ation which, if not avoided, could result 
in death or serious injury.

CAUTION

 ...............Indicates a potentially hazardous situa-

tion which, if not avoided, may result in 
minor or moderate injury. It may also be 
sued to alert against unsafe practices.

NOTE

 .....................Indicates situation that may result in 

equipment or property-damage-only 
accidents.

DANGER

• Do not ground units to water pipes, telephone wires or 

lightning rods because incomplete grounding could 
cause a severe shock hazard resulting in severe injury or 
death, and to gas pipes because a gas leak could result in 
an explosion which could lead to severe injury or death.

• Do not install unit in an area where flammable materials 

are present due to risk of explosion resulting in serious 
injury or death.

• Refrigerant gas is heavier than air and displaces oxygen. 

A massive leak could lead to oxygen depletion, espe-
cially in basements, and an asphyxiation hazard could 
occur leading to serious injury or death.

• If the refrigerant gas leaks during installation, ventilate 

the area immediately.

Refrigerant gas may produce toxic gas if it comes in contact 
with fire such as from a fan, heater, stove or cooking device. 
Exposure to this gas could result in severe injury or death.

• After completing the installation work, check that the 

refrigerant gas does not leak.

Refrigerant gas may produce toxic gas if it comes in contact 
with fire such as from a fan, heater, stove or cooking device. 
Exposure to this gas could result in severe injury or death.

• Safely dispose of the packing materials.

Packing materials, such as nails and other metal or wooden 
parts, may cause stabs or other injuries. Tear apart and 
throw away plastic packaging bags so that children will not 
play with them. Children playing with plastic bags face the 
danger of death by suffocation.

WARNING

• Ask your dealer or qualified personnel to carry out 

installation work. Do not try to install the air conditioner 
by yourself.

Improper installation may result in water leakage, electric 
shocks or fire.

• Perform installation work in accordance with this instal-

lation manual.

Improper installation may result in water leakage, electric 
shocks or fire.

• Be sure to use only the specified accessories and parts 

for installation work.

Failure to use the specified parts may result in water leakage, 
electric shocks, fire or the unit falling.

• Install the air conditioner on a foundation strong enough 

to withstand the weight of the unit.

A foundation of insufficient strength may result in the equip-
ment falling and causing injuries.

• Carry out the specified installation work after consider-

ing strong winds, typhoons or earthquakes.

Improper installation work may result in the equipment falling 
and causing accidents.

• Make sure that a separate power supply circuit is pro-

vided for this unit and that all electrical work is carried 
out by qualified personnel according to local laws and 
regulations and this installation manual.

An insufficient power supply capacity or improper electrical 
construction may lead to electric shocks or fire.

• Make sure that all wiring is secured, the specified wires 

are used, and no external forces act on the terminal con-
nections or wires.

Improper connections or installation may result in fire.

• When wiring the power supply and connecting the remote 

controller wire and transmission wire, position the wires 
so that the control box lid can be securely fastened.

Improper positioning of the control box lid may result in elec-
tric shocks, fire or the terminals overheating.

Summary of Contents for SkyAir SkyAir FHQ42MVJU

















Reviews: