SiUS30-1301
Wired Remote Controller
Remote Controller
31
1.4
Centralized Control Group No. Setting
1.4.1 BRC1E71/72
In order to conduct the centralized remote control using the central remote controller and the unified
ON/OFF controller, Group No. settings should be made by group using the operating remote
controller.
Make Group No. settings for centralized remote control using the operating remote controller.
<Group Address (Unit)>
Note:
For setting group No. of Heat reclaim ventilator and wiring adaptor for other air conditioners,
etc., refer to the instruction manual attached.
NOTICE
Enter the group No. and installation place of the indoor unit into the attached installation table. Be
sure to keep the installation table with the operation manual for maintenance.
Service settings menu
Item 2
Description
This menu is used to make group address setting for centralized
control.
It is also used to make group address setting by indoor unit.
Group Address
Group Address (Group)
Group Address (Unit)
Select "Group Address"
and then press Menu/OK
button.
Press Cancel
button once.
Select "Group
Address (Unit)"
and then press
Menu/OK button.
Press Cancel
button once.
Select the
desired Group
Address using
the
/
(Up/Down)
buttons, and then
press Menu/OK
button.
Select Group
Address using
the
/
buttons,
and then press
Menu/OK button.
Service
settings menu
is displayed.
Item 2 is
displayed.
Item 2 is
displayed.
Item 2 is
displayed.
Basic screen
is displayed.
Press and hold
Cancel button
for 4 seconds
or more.
Press
Cancel
button
once.
Press Cancel
button once.