![background image](http://html1.mh-extra.com/html/daikin/maverick-i-mps-a03c/maverick-i-mps-a03c_installation-and-maintenance-manual_2460257003.webp)
I
nTroduCTIon
www.DaikinApplied.com
3
IM 970-2 • MAVERICK I ROOFTOP
I
nTroduCTIon
General
This manual contains the installation and operating instructions
for your packaged rooftop unit. There are some precautions
that should be taken to derive maximum satisfaction from it.
Improper installation can result in unsatisfactory operation or
dangerous conditions.
Read this manual and any instructions packaged with separate
equipment prior to installation. Give this manual to the owner
and explain its provisions. The owner should retain this manual
for future reference.
This product line does have an optional DDC controller. For
operation and information on using and programming the
MicroTech
®
III unit controller, refer to the appropriate operation
manual (see
Table 1
).
For a description of operation and information on using
the keypad to view data and set parameters, refer to the
appropriate program-specific operation manual (see
Table 1
).
Table 1: Operation, Installation and Maintenance
Resources
Unit
Manual
Rooftop Unit Control Configuration
Operation Manual Bulletin Number
DDC Unit Controller
OM 1077
BACnet Communication Module
IM 1000
LonWorks Communication Module
IM 999
Checking Product Received
Upon receiving the unit, inspect for any damage from
shipment. Claims for damage, either shipping or concealed,
should be filed immediately with the shipping company.
Important:
Check the unit model number, heating size,
electrical characteristics, and accessories to determine if they
are correct.
Hazardous Information Messages
DANGER
The manufacturer’s warranty does not cover any damage or defect to
the air conditioner caused by the attachment or use of any components,
accessories or devices (other than those authorized by the manufacturer)
into, onto, or in conjunction with the air conditioner. you should be aware
that the use of unauthorized components, accessories or devices may
adversely affect the operation of the air conditioner and may also endanger
life and property. The manufacturer disclaims any responsibility for such
loss or injury resulting from the use of such unauthorized components,
accessories or devices.
WARNING
Provide adequate combustion and ventilation air to the unit space as
specified in the combustion and ventilation air section of these instructions.
CAUTION
Install this unit only in a location and position as specified in the “
Mechanical
Installation
” section of these instructions. Provide adequate combustion
and ventilation air to the unit space as specified in the venting section of
these instructions.
WARNING
Combustion products must be discharged outdoors. Connect this unit to an
approved vent system only, as specified in “
Mechanical Installation
” section
of these instructions.
NOTICE
Use only with type of gas approved for this unit. Refer to the unit rating
plate.
DANGER
Never test for gas leaks with an open flame. It can cause an explosion
or fire resulting in property damage, personal injury or death. Use a
commercially available soap solution made specifically for the detection of
leaks to check all connections, as specified in the “
Mechanical Installation
”
section of these instructions.
NOTICE
Always install unit to operate within the unit’s intended temperature-rise
range with a duct system which has an external static pressure within the
allowable range, as specified in the “
Mechanical Installation
” section of
these instructions. See also unit rating plate.
DANGER
Units are not design certified to be installed inside the structure. Doing so
can cause inadequate unit performance as well as property damage and
carbon monoxide poisoning resulting in personal injury or death.