![background image](http://html.mh-extra.com/html/daikin/fxaq-pvju/fxaq-pvju_engineeiring-data_2459646028.webp)
EDUS391100-F6
Installation
FXAQ-PVJU
27
Hook the indoor unit onto the installation panel. (Refer to Fig. 9)
(6)
Placing buffering material between the wall and the indoor unit at this time will make work easier.
•
Refrigerant piping
Be sure to pass all wires through
the wiring guide.
Tab
(There are 2 places.)
Wiring (locally procured)
Transmission wiring, Remote controller wiring
Wall
Installation panel
(accessory) (1)
Front panel
Front grille
Control box cover
Place buffering material
Power supply wiring,
Ground wiring
Conduit
Hook the indoor unit hook onto the installation panel (1).
Fig. 9
For bottom-right and back-right piping
Pass the drain hose and the refrigerant piping to the wall.
•
Pass power supply wiring and ground wiring threaded through conduit (For connecting the con-
(7)
duit to the unit, see “8-1 HOW TO CONNECT WIRINGS”), and remote controller wiring through
the wiring guide in through the back of the indoor unit and to the front.
Connect the piping. (See “5. REFRIGERANT PIPING WORK” and Fig. 10)
(8)
Secure with
vinyl tape.
Seal with putty corking material.
Drain hose
Transmission wiring
and remote controller
wiring
Fig. 10
A
A
arrow view
Refrigerant piping
Transmission wiring and
remote controller wiring
Wrap the insulating tape overlapping at least half the width with
each wrap.
Wrap the insulating tape all the way to the L-shaped bend.
Refrigerant piping
Conduit
Seal the piping through-hole with putty corking material.
•