background image

32

Call the service shop immediately.

 WARNING

„

„

When an abnormality (such as a burning smell) occurs, stop operation and turn the breaker off.

Continued operation in an abnormal condition may result in troubles, electric shocks or fire.

Consult the service shop where you bought the air conditioner.

„

„

Do not attempt to repair or modify the air conditioner by yourself.

Incorrect work may result in electric shocks or fire.

Consult the service shop where you bought the air conditioner.

If one of the following symptoms takes place, call the service shop immediately.

„

„

The power cord is abnormally hot or damaged.

„

„

An abnormal sound is heard during operation.

„

„

The safety breaker, a fuse, or the earth leakage 

breaker cuts off the operation frequently. 

„

„

A switch or a button often fails to work properly.

„

„

There is a burning smell.

„

„

Water leaks from the indoor unit.

Turn the breaker off and call the service shop.

„

„

After a power failure

The air conditioner automatically resumes operation in about 3 minutes. You should just wait for a while.

„

„

Lightning

If lightning may strike the neighbouring area, stop operation and turn the breaker off for system protection.

Disposal requirements.

• Dismantling of the unit, treatment of the refrigerant, oil and eventual other parts, should be done in accordance with the 

relevant local and national regulations.

We recommend periodical maintenance.

In certain operating conditions, the inside of the air conditioner may get foul after several seasons of use, resulting in poor 

performance. It is recommended to have periodical maintenance by a specialist aside from regular cleaning by the user. 

For specialist maintenance, contact the service shop where you bought the air conditioner.

The maintenance cost must be borne by the user.

Troubleshooting

01_EN_3P705032-9.indd   32

30/08/2022   1:18:10 pm

Summary of Contents for FVXS25R2V1A









































































Reviews: