![background image](http://html1.mh-extra.com/html/daikin/fvxs25r2v1a/fvxs25r2v1a_operation-manual_4703953065.webp)
27
Filters
1.
Open the front panel.
Page 26
2.
Remove the air filter.
• Press the claws on the right and left of the air filter down slightly, then pull upward.
3.
Take off the titanium apatite photocatalytic
air-purifying filter.
• Hold the tabs of the frame, and remove the claws in 4 places.
4.
Clean or replace each filter.
See figure.
5.
Set the air filter and titanium apatite photocatalytic air-purifying
filter as they were and close the front panel.
• Operation without air filter may result in troubles as dust will accumulate inside the indoor unit.
• Insert the 2 tabs on the lower side of air filter into the body.
• Then, insert the 2 tabs on the upper side into the body.
•
Insert the tab on the right side into the body.
• Close the panel slowly.
• Slide the 2 stoppers on the left and right sides
outward until they click.
Air filter
Titanium apatite
photocatalytic
air-purifying filter
CAUTION
•
Do not touch the aluminum fins by bare hand at the time of dismounting or mounting the filter.
01_EN_3P705032-9.indd 27
30/08/2022 1:18:09 pm