![background image](http://html1.mh-extra.com/html/daikin/fvxs25r2v1a/fvxs25r2v1a_operation-manual_4703953069.webp)
31
Check again.
Please check again before calling a repair person.
Case
Check
The air conditioner does not operate.
(OPERATION lamp is off.)
•
Hasn’t a breaker turned off or a fuse blown?
•
Isn’t it a power failure?
•
Are batteries set in the remote controller?
•
Is the timer setting correct?
Cooling (Heating) effect is poor.
•
Is the air filter clean?
•
Is there anything blocking the air inlet or the outlet of the indoor and the outdoor units?
•
Is the temperature setting appropriate?
•
Are the windows and doors closed?
•
Are the airflow rate and the air direction set appropriately?
Operation stops suddenly.
(OPERATION lamp flashes.)
•
Is the air filter clean?
Clean the air filter.
•
Is there anything blocking the air inlet or the outlet of the indoor and the outdoor units?
Turn the bleaker off and take all obstacles away. Then turn it on again and try operating
the air conditioner with the remote controller. If the lamp still flashes, call the service shop
where you bought the air conditioner.
An abnormal functioning happens
during operation.
•
The air conditioner may malfunction with lightning or radio waves. Turn the breaker off,
turn it on again and try operating the air conditioner with the remote controller.
The flap does not start swinging
immediately.
•
The air conditioner is adjusting the flap position. The flap will start moving soon.
Case
Explanation
The outdoor fan rotates while the air
conditioner is not in operation.
After operation is stopped:
•
The outdoor fan continues rotating for another 60 seconds for system protection.
While the air conditioner is not in operation:
•
When the outdoor temperature is very high, the outdoor fan starts rotating for system
protection.
The operation stopped suddenly.
(OPERATION lamp is on.)
•
For system protection, the air conditioner may stop operating on a sudden large voltage
fluctuation.
It automatically resumes operation in about 3 minutes.
No remote controller signals are
displayed.
The remote controller sensitivity is
low.
The display is low in contrast or
blacked out.
The display runs out of control.
•
The batteries are dying and the remote controller is malfunctioning. Replace all the
batteries with new size batteries, AAA.LR03 (alkaline). For details, refer to set the
batteries of this manual.
Page 8
The ON/OFF TIMER does not operate
according to the settings.
•
Check if the ON/OFF TIMER and the WEEKLY TIMER are set to the same time.
Change or disable the settings in the WEEKLY TIMER.
Page 20
01_EN_3P705032-9.indd 31
30/08/2022 1:18:10 pm