English
10
Observe the following precautions to ensure the
system operates.
•
Prevent direct sunlight from entering a room
during COOLING OPERATION by using curtains
or blinds.
•
Keep doors and windows closed. If the doors and
windows remain open, room air will flow out and
decrease the effect of cooling and heating .
•
Never place objects near the air inlet and the air
outlet of the unit. It may deteriorate the effect or
stop the operation.
•
Adjust the room temperature properly for a com-
fortable environment. Avoid excessive heating or
cooling.
Not doing so wastes electricity.
•
When the display shows “
” or “Time to clean
filter”, ask a qualified service person to clean the
filters.
(Refer to “MAINTENANCE” on page 10.)
Operating the unit with stained air filter may
decrease capacity or cause malfunction.
•
Install TVs, radios, and stereos 1 m or more away
from the indoor unit and remote controller.
Images may become fuzzy and noise may be
generated.
•
Turn off the power circuit breaker when it is not in
use for a long period (only for R410A refrigerant).
When the main power switch is turned on, small
amount of power is consumed even if the system
is not in operation. (*1) Turn off the power circuit
breaker for saving energy. When reoperating, turn
on the power circuit breaker 6 hours before
operation for smooth running. (Refer to
“MAINTENANCE” on page 10.) (*2)
*1 The consumed power while the outdoor unit is
not in operation depends on the model.
*2 The setting before the power circuit breaker is
cut off is stored. (The timer setting is cleared.)
•
Fully use the function of airflow direction adjust.
Cold air gathers on the floor, and warm air gathers
in the ceiling.
Set the air discharge to horizontal direction during
COOLING or PROGRAM DRY OPERATION, and
set it downwards during HEATING OPERATION.
Do not let the air blow directly to a person.
•
Use the TIMER OPERATION effectively.
It takes some time until the indoor temperature
reaches the set temperature. It is advisable to
start operation in advance using TIMER OPERA-
TION.
7. OPTIMUM OPERATION
ONLY A QUALIFIED SERVICE PERSON IS
ALLOWED TO PERFORM MAINTENANCE
WARNING
•
Do not use flammable gas (such as hair sprays
and insecticides) near the air conditioner.
•
Do not wipe the air conditioner with benzine or
thinner.
It may cause cracks, electric shocks or a fire.
CAUTION
•
Do not wash the air conditioner with water.
Doing so may result in an electric shock and fire.
•
To clean the air conditioner, be sure to stop oper-
ation, and turn the power circuit breaker off. It may
cause electric shock or injury.
•
After cleaning, quickly turn the power supply
breaker back on.
NOTE
•
Do not remove the air filter except for during
cleaning. Doing so may damage the unit.
•
Do not install anything (such as kitchen paper)
other than the approved air filters on the air inlet.
Doing so may lower operation efficiency and
cause freezing or leakage.
HOW TO CLEAN THE AIR FILTER
When the remote controller indicates “
” or “Time
to clean filter”, clean the air filter.
•
It indicates after running for a certain time.
NOTE
•
The time until the display appears can be
changed. For information on using the air condi-
tioner in a dirty place, contact your dealer.
•
Once the staining on the air filter cannot be
removed, replace the filter with a new one.
(The air filter for replacement is provided as an
optional part.)
•
Do not use the air conditioner in an oily environ-
ment. If oil adheres, clean the air filter and suction
grille regularly.
8. MAINTENANCE
(FOR SERVICE PERSONNEL)
Stain
Time until display
appears
Standard
2,500 hours
(approx. 1 year)
When the amount of
staining is large
1,250 hours
(approx. a half year)
3PEN486799-1.book Page 10 Wednesday, June 14, 2017 9:43 AM
