15
English
•
Check if the airflow direction is not proper.
Set to an appropriate temperature, fan speed,
and airflow direction.
•
Check if the doors or the windows are open.
Shut doors or windows to prevent wind from
coming in.
•
Check if direct sunlight enters the room (when
cooling).
Use curtains or blinds.
•
When there are too many inhabitants in the
room (when cooling).
•
Check if the heat source of the room is exces-
sive (when cooling).
4. Operation was performed or stopped
although the on/off button was not pressed.
•
Are you sure that the ON/OFF timer operation
is not used?
Turn off the ON/OFF timer.
Please refer to operation manual attached to
the remote controller.
•
Are you sure that any remote control device is
not connected?
Contact the central control room that directed
the stop.
•
Are you sure that the display for centralized
control is not lit?
Contact the central control room that directed
the stop.
If the problem is not solved after checking the
above points, please do not try to repair it
yourself.
In such cases, always ask your local dealer.
At this time, please tell the symptom and
model name (written on the model name
plate).
If one of the following malfunctions occurs, take
the measures shown below and contact your
local dealer.
The air conditioner must be repaired by a qualified
service person.
WARNING
When the air conditioner is malfunctioning
(giving off a burning odor, etc.), turn off
power to the air conditioner and contact your
local dealer.
Continued operation under such circumstances
may result in a failure, electric shocks or a fire.
Contact your local dealer.
•
If a safety device such as a fuse, a power circuit
breaker or an earth leakage breaker frequently
actuates;
Measure:
Do not turn on the main power switch.
•
If the ON/OFF switch does not properly work;
Measure:
Turn off the main power switch.
•
If water leaks from the indoor unit.
Measure:
Stop the operation.
•
If the display “
”, “UNIT No.”, and the OPERA-
TION lamp flash and the “MALFUNCTION
CODE” appears. (In case of BRC1D)
Measure:
Notify your local dealer and inform
malfunction code of the display.
10-2. FXUQ
Read the operation manual attached to the out-
door unit.
UNIT No.
C
L
H
OPERATION lamp
INSPECTION
display
MALFUNCTION CODE
INDOOR UNIT No. in
which a malfunction occurs
01_EN_3P170549-16W.fm Page 15 Thursday, February 20, 2014 5:28 PM
