FDXS Series
SiUS091133
85
Operation Manual
3.7
OFF TIMER Operation
OFF TIMER Operation
Timer functions are useful for automatically switching the air conditioner on or off
at night or in the morning. You can also use OFF TIMER and ON TIMER in
combination.
To use OFF TIMER operation
To cancel OFF TIMER operation
•
Check that the clock is correct.
If not, set the clock to the present time.
1.
Press .
“ ” is displayed on the LCD.
“ ” blinks.
• “ ” is no longer displayed on the LCD.
•
Each pressing of either button increases or decreases the time setting by 10 minutes.
Holding down either button changes the time setting rapidly.
• “ ” and setting time are displayed on the LCD.
• The TIMER lamp lights yellow.
• “ ” and setting time are no longer displayed on the LCD.
• “ ” and day of the week are displayed on the LCD.
• The TIMER lamp goes off.
• When TIMER is set, the present time is not displayed.
• Once you set ON/OFF TIMER, the time setting is kept in the memory. The memory is canceled when remote controller batteries are replaced.
• When operating the unit via the ON/OFF TIMER, the actual length of operation may vary from the time entered by the user. (Maximum
approximately 10 minutes)
• When the OFF TIMER is set, the air conditioner automatically adjusts the temperature setting (0.9˚F (0.5˚C) up in COOL, 3.6˚F (2.0˚C) down in
HEAT) to prevent excessive cooling (heating) for your pleasant sleep.
2.
Press until the time setting reaches the
point you like.
3.
Press again.
Press .
Display
NOTE
Notes on TIMER operation
NIGHT SET mode
