background image

7 Troubleshooting

Operation manual

10

FTXP20~71L2V1B

R32 split series

3P511999-1C – 2018.01

INFORMATION

▪ If  the  dust  does  NOT  come  off  easily,  wash  the  air

filters  with  a  neutral  detergent  diluted  in  lukewarm
water. Dry the air filters in the shade.

▪ Be  sure  to  remove  the  titanium  apatite  deodorizing

filter.

▪ It  is  recommended  to  clean  the  air  filters  every  2

weeks.

6.6

To clean the titanium apatite
deodorizing filter

INFORMATION

Clean the filter with water every 6 months.

1

Remove  the  titanium  apatite  deodorizing  filter  from  the  tabs
(class 20~35) or all 4 claws (class 50~71).

Class 20~35

Class 50~71

a

Claw

2

Remove the dust from the filter with a vacuum cleaner.

3

Soak the filter for 10 to 15 minutes in warm water.

Note: 

 

(class 50~71)

 Do NOT remove the filter from the frame.

Class 20~35

Class 50~71

4

After washing, shake off remaining water and dry the filter in the
shade. Do NOT wring out the filter when removing water.

6.7

To replace the titanium apatite
deodorizing filter

INFORMATION

Replace the filter every 3 years.

To order titanium apatite deodorizing filters, contact your dealer.

Item

Part number

Titanium deodorizing filter 1 set

KAF970A46

1

Remove  the  filter  from  the  tabs  (class  20~35)  or  frame  (class
50~71) and replace the filter with a new one.

INFORMATION

▪ Do NOT throw away the filter frame, but use it again.

▪ Dispose of the old filter as non-flammable waste.

6.8

To close the front panel

1

Install  the  air  filters  and  the  titanium  apatite  deodorizing  filters
back in their original positions.

2

Gently press the front panel at both sides and at the center until
it clicks.

6.9

To take following items into
account before a long idle period

1

Set the mode to 

fan only

 by pressing 

 button to dry the

inside of the unit.

2

After operation stops, turn the breaker off.

3

Clean the air filters and replace them in their original position.

4

Remove the batteries from the user interface.

INFORMATION

It  is  recommended  to  have  periodical  maintenance
performed  by  a  specialist.  For  specialist  maintenance,
contact  your  dealer.  Maintenance  costs  shall  be  borne  by
the customer.

In  certain  operating  conditions  the  inside  of  the  unit  may
get dirty after several seasons of use. This results in poor
performance.

7

Troubleshooting

If one of the following malfunctions occur, take the measures shown
below and contact your dealer.

WARNING

Stop  operation  and  shut  off  the  power  if  anything
unusual occurs (burning smells etc.).

Leaving  the  unit  running  under  such  circumstances  may
cause breakage, electric shock or fire. Contact your dealer.

The system MUST be repaired by a qualified service person:

Summary of Contents for FTXP50L2V1B

















Reviews: